İ L T E K

 



 

 

   

USB Data AcquisitionOverview

DT ECON Series

 
DT9800 Series

 
DT9834 Series

 
DT9836/32 Series

 
Low Cost USB 2.0 Mini-Instruments

 
Isolated USB Data Acquisition Modules

 
High Performance Multifunction USB Data Acquisition

 
Simultaneous, High Performance Measurement

 


 


 


 


 
-High Input Impedance for
 accurate measurements.
-Multiplexed sampling at up to 50kS/s, or Simultaneous, sampling at up to 6x150 kS/s
-Resolution: 10/12/16 bits
 
- 100 kHz throughput
- 16 SE, or 8 DE, analog inputs
- 16 digital I/O
- 2 C/Ts
- 12 or 16-bit resolution,
- Optional analog outputs
- Optional 500 Volt USB isolation
 
- up to 32 analog inputs
- 500 kHz througput
- 16-bit multi-function
- 4 analog outputs
- 500 kHz analog output
- 500 Volt USB port isolation
 
- up to 12 simultaneous
  analog inputs
- up to 2.0 MHz/channnel
- 16-bit resolution
- Simultaneous analog, digital
  and C/T within 1 nsec.
- 500 Volt USB port isolation
 

Simultaneous USB Data Acq.overview

DT9816 Series

 
DT9836/32 Series

 
DT9840 Series

 
DT9820/DT9837 Series

 
Simultaneous Measurement at Low Cost

 
NEW!!! Simultaneous High Performance Measurement

 
DSP Based Control and Measurement

 
Precision modules, where 24-Bit resolution is required

 


 


 


 


 
- 6 analog input channels,
  each at 150 kHz
- 16-bit Resolution
- Simultaneous within 1 nsec.
 
- up to 12 simultaneous
  analog inputs
- up to 2.0 MHz/channnel
- 16-bit resolution
- Simultaneous analog, digital
  and C/T within 1 nsec.
- 500 Volt USB isolation
 
- DT9841:
  Up to 8 ch. 24-Bit resolution, integral anti-aliasing filter, up to 100 kHz per channel sampling rate, 2 analog outputs
- DT9842:
  Up to 8 ch, 16-Bit Resolution with up to 100kHz per channel sampling rate and up to 8 analog out,
 
DT9820
- for accurate logging of low level low frequency voltages

DT9837
- for sound & vibration analysis up to 25 kHz bandwidth

Digital I/O
 

Digital I/O modules with USB or PCI interface and various configurations. Galvanically isolated input and output available as well as high channel count modules.

Digital I/O
Low Cost Digital I/O USB Mini-Instruments
 

  • 28 digital I/O lines

  • DT9817-R: 8 input / 8 output lines ±32V, channel to channel isolation

  • 1 Counter/Timer (32-Bit)

  • Drive capability for solid-state relays

 

DT9835
96 Digital I/O lines
 

  • 64 programmable TTL digital I/O.

  • A further 32 TTL Digital Inputs.

  • Semiconductor relay switching, (12mA sink).

  • Status Change Interrupt on first 16 lines

 

Digital I/O Card for PCI Bus
DT335 Series with 32 digital I/O lines
 

  • 32 TTL Level digital I/O lines.

  • Eight Input lines capable of Interrupt on change

  • 8-Bit words programmable as Inputs, or Outputs

  • Two interface connector options available

 

Galvanically Isolated Digital I/O Card
DT351 with 16 digital I/O lines
 

  • 8 Galvanically Isolated Inputs; 3.5 - 32V.

  • 8 Galvanically Isolated Outputs, max. 60V/100mA

  • Channel to Channel and Channel to Computer Isolation

  • 250 VDC Isolation Channel to Channel

 

Counter/Timer Card with Digital I/O
DT340 with 8 Counter/Timers
 

  • 8 Counter/Timers with 16-Bits

  • Software cascadeable to 32-Bits

  • Upto 20 MHz Frequency Measurement

  • 4 Internal 24-Bit Interval Timers

Sound & Vibration Solutions

DT9837 Series

 
DT9841-VIB

 
4 Channel Data Acquisition Module with IEPE Inputs

 
8 Channel Data Acquisition with IEPE Inputs, DSP controlled

 


 


 
- 4 SE analog Inputs
- 24-bit, 52 kHz per channel
- analog Out, Tacho, Trigger

- powered by USB
- ready-to-run device
- BNC boxed or OEM board level
- precise and cost-effective
 
- 8 SE analog Inputs
- 24 bit, 100 kHz per channel
- 2 analog waveform Outputs

- programmable DSP for highest performance
- BNC Box
 

PCI Data AcquisitionOverview

DT300-Series

 
DT3010/DT3034 Series

 
DT3000-Series

 
ISA Bus

 
Low Cost, PCI Bus-Master, Multi-function cards.

 
High Speed, PCI Bus Master, Multi-Function cards.

 
High Channel count, Multi-function cards.

 
A wide range of Data Acquisition cards for the ISA Bus

 


 


 


 


 
- 16 Analog inputs
- 12/16-Bit resolution
- Upto 400kHz
- Optional dual Programmable
   Analog Outputs.
 
- 1.25 MHz sampling speed
- 32 Analog channels
- 12, or 16-Bit versions
- 2 waveform Analog Outputs
 
- 12/16-Bit resolution options
- Upto 64 input channels
- Up to 330kHz sampling speed
- Dual Analog outputs
 
- 12/16-Bit Resolution
- Multi-Channel devices
- Analog Output Functions
- Digital I/O
- Counter/Timer facilities

Software

DT Measure Foundry

 
Software Programming Tools

 
Software and Hardware Measurement Bundles

 
Compatible Software

 
Test & Measurement, software application development suite

 
Application Software for Data Acquisition

 
Save Money with hardware and software bundles

 
Measurement and Analysis software compatible with Data Translation hardware

 


 


 


 


 
-Instinctive and easy to use software, for all your test, measurement and control applications, with "real-time" attributes.
 
-The OMNI CD contains a range of software applications including an evaluation copy of DT Measure Foundry.
 
-DT Measure Foundry in combination with our USB and PCI hardware.
 
- quickDAQ
- Agilent VEE
- FlexPro
- LabVIEW, DASYLab, DIAdem
- TestPoint
- And more .....

Imaging Solutions

PCI Frame Grabbers

 
DT Global Lab Image /2 and DT Vision Foundry

 
Image Analysis Bundles

 
Cameras, Lenses, Lighting Solutions & Accessories

 
Wide range of boards for all camera types

 
Powerful user friendly software

 
Powerful hardware and software combinations, which save you cash!!

 
Hardware & Components for imaging solutions

 


 


 


 


 
- CameraLink
- RGB and Composite Colour
- Mono
- Progressive scan
- Interlaced scan
- Linescan
- Area Scan
- Simultaneous input

 
These are powerful PC based software packages for image analysis and machine vision applications. Vision Foundry Supports FDA 21 CFR Part 11 regulations.
 
Easy to use and cost-effective image analysis hardware and software combinations.
 
Analogue and digital cameras.
Lenses, incl Telecentric.
Filters & Extension Tubes.
Lighting: Linear, Flat Panel, Ring and LED including programmable intensity controller

 

Accessories

Passive BNC Connection Boxes for PCI hardware

 
Screw Terminal Interface Panels

 
Cables, Power Supplies

 
Simplifying Connection and Disconnection

 
Easy Access to Field Wiring

 
Interfacing and Power to Data Acq Hardware

 


 


 


 
Passive BNC Connection for the DT300, DT3000, and DT3010 Series
 
Avoids connecting to high density connectors on PC panels.
 
A complete range of Cables and Power options for the Data Acquisition product ranges.

                   Daha fazla ayrıntı ve bilgi için http://shop.datatranslation.eu/ sitesine bakabilirsiniz.

 
 
 

 

 
Sahilyolu Değirmen Sokak No:4 Maltepe İstanbul
0216 399 32 53 
bilgi@iltek.com.tr
|Ana Sayfa|